ENPLAS

Machined Parts

Product Category

Extruded Nylon

Enplas Polyester

- ENPET E
- ENPET B

Enplas Polycarbonate

Sulphonic Polymers

- PSU
- PES
- PPSU

Sulphonic Polymers :-

Sulphonic Polymers are amorphous engineering thermoplastics with proven performance at elevated temperatures. Sulphones are characterized by flame retardant and chemical resistant properties. Good mechanical properties and thermal stability allow load-bearing applications over a broad temperature range.

Application

PSU :-

Enplas PSU exhibits good chemical resistance, good thermal stability, excellent hydrolysis resistance and is Physiologically inert. It is used extensively in Medical Devices and the Food Processing Industry. Modified Grades are Available.

Property	Unit	PSU
Specific Gravity	--	1.24
Melting Point	°c	--
Continuous Use Temp Limit	°c	149.00
Water Absorbtion/24 Hours	%	0.3
Water Absorbtion@ saturation	%	0.6
Tensile Strength	MPa	70.00
Tensile Modulus	MPa	2480.00
Tensile Elongation @ break	%	50
Flexural Strength	MPa	106.00
Flexural Modulus	MPa	2700.00
Compressive Strength	MPa	96.00
Compressive Modulus	MPa	--
Rockwell Hardness	M	M69
Rockwell Hardness	R	R120
Izod Impact Notched	N.m/cm	0.4
Hardness, Durometer, Shore D	-	D80
Shear Strength	MPa	62
Coeff of Friction	N.m/cm	0.1
Coeff of Linear Thermal Expansion	in/⁰F(1.0E-5)	3.1
Heat Deflection Temp @ 66 psi	°c	180
Heat Deflection Temp @ 264 psi	°c	174
Thermal Conductivity	W/m.K	0.25
Flammability rating	-	V-0
Dielectric Strength	volts/cm	167300
Dielectric Constant @ 1 MHz	-	3.06
Dissipation Factor @ 1MHz	-	0.005
Volume Resistivity	ohm.cm	5.00E+16
FDA Compliance	-	yes

Application

Next Page >>

Engineering Polymers

High Performance Polymers

Machined Parts

Product Category