ENPLAS

Machined Parts

Product Category

Cast Nylon

- PA6G Natural
- PA6G MDS
- PA6G HI
- PA6GNF
- Enpals PA 6G GF
- Lubron 100
- Lubron 100S
- Lubron 150
- PA 12G
- FE MID
- FE-Mid
- PA 12G

Polyacetals

- POMH
- POMC

Cast Nylons:

Enplas Cast Nylon grades are characterized by excellent thermal and mechanical properties. These polymers are easily machined to precise tolerances. Several Nylon grades are available to suit a wide variety of applications.

Application

Self lubricating, Impact resistant, Molybdenum filled grades are just a few grades available that improve wear resistance, reduce or negate lubricating requirements and display excellent sound dampening characteristics.

Enplas’s ability to manufacture custom shapes and large sizes has transpired into proven applications in Mining, Paper Mills, Food processing and Construction fields, to name a few.

PA6G Natural:

Enplas PA6G Cast Polyamide is a versatile and economical material ideal for use in OEM or maintenance in a wide cross section of industries. It replaces steel, cast iron, bronze, aluminum, rubber and wood or laminated phenolics.

Application

PA6G MDS :-

Enplas PA6G MDS is manufactured by incorporating Molybdenum Disulphide (MoS2) and other additives to standard Cast Nylon in order to improve wear properties. This material also displays higher compressive strength and excellent impact resistance.

Application

Enpals PA 6G GF :-

This particular polymer is a 30% glass filled grade of polyamide 6. It is characterized by its dimensional stability and enhanced creep resistance. It possesses superior load bearing characteristics at high temperatres.
Application

PA6G HI :-

Enplas PA6g HI is a modified grade of cast nylon possessing outstanding shock and impact resistance

Property	Unit	Natural
		PA6G
Specific Fravity	--	1.15
Tensile Strength	Mpa	83
Modulus of Elasticity	Mpa	2800
Elongation at Break	%	20
Flexural Strength	Mpa	103
Flexural Modulus	Mpa	2770
Shear Strength	Mpa	76
Compressive Strength	Mpa	86
Compressive Modulus	Mpa	2900
Hardness Rockwell	--	M85 (R115)
Hardness Durometer	--	D85
Izod Impact	N.m/cm	0.17
Coeffecient of Friction	--	0.2
Limiting PV	ft.lbs/in2 min	3000
Wear Factor	in3min/ft.lbs.hr	100
Coeffecient of Linear Thermal Expansion	in/in/oF	5 E -6
Heat Deflection Temperature	°C	93
Glass Transition Temperature	°C	--
Mealting Point	°C	216
Continuous Use Temperature	°C	93
Thermal Conductivity	W/m.K	0.25
Dielectric Strength	Volts/mil	500
Surface Resistivity	ohm/square	>1E+13
Dielectric Constant, 108 Hz	--	3.7
Dissipation Factor, 108 Hz	--	--
Flammability @ 3.1 mm	--	HB
24 hour Water Absorption	%	0.6
Saturation Water Absoprtion	%	7
FDA compliance	--	Yes

Typical Applications:
Wear-pads, liners and sheaves

Property	Unit	MDS
		Cast Nylon
Specific Fravity	--	1.16
Tensile Strength	Mpa	76
Modulus of Elasticity	Mpa	2760
Elongation at Break	%	30
Flexural Strength	Mpa	110
Flexural Modulus	Mpa	3500
Shear Strength	Mpa	72
Compressive Strength	Mpa	97
Compressive Modulus	Mpa	2760
Hardness Rockwell	--	M80 (R110)
Hardness Durometer	--	D85
Izod Impact	N.m/cm	0.15
Coeffecient of Friction	--	0.2
Limiting PV	ft.lbs/in2 min	3000
Wear Factor	in3min/ft.lbs.hr	90
Coeffecient of Linear Thermal Expansion	in/in/oF	5 E-5
Heat Deflection Temperature	oC	93
Glass Transition Temperature	oC	--
Metaling Point	oC	216
Continuous Use Temperature	oC	93
Thermal Conductivity	BTU in/hr ft2 oF	--
Dielectric Strength	Volts/mil	400
Surface Resistivity	ohm/square	>1E+13
Dielectric Constant, 108 Hz	--	3.7
Dissipation Factor, 108 Hz	--	--
Flammability @ 3.1 mm	--	HB
24 hour Water Absorption	%	0.6
Saturation Water Absoprtion	%	7
FDA compliance	--	No

Typical Applications :-

Property	Unit	30% Glass Filled
		Nylon
Specific Fravity	--	1.29
Tensile Strength	MPa	93
Modulus of Elasticity	MPa	4650
Elongation at Break	%	5
Flexural Strength	MPa	145
Flexural Modulus	MPa	4480
Shear Strength	MPa	--
Compressive Strength	MPa	124
Compressive Modulus	MPa	4140
Hardness Rockwell	--	M75
Hardness Durometer	--	--
Izod Impact	ft.lb/in(of notch)	--
Coeffecient of Friction	--	--
Limiting PV	ft.lbs/in2 min	--
Wear Factor	in3min/ft.lbs.hr	---
Coeffecient of Linear Thermal Expansion	in/in/oF	2 E -5
Heat Deflection Temperature	oC	204
Glass Transition Temperature	oC	--
Metaling Point	oC	260
Continuous Use Temperature	oC	104
Thermal Conductivity	BTU in/hr ft2 oF	1.7
Dielectric Strength	Volts/mil	350
Surface Resistivity	ohm/square	0
Dielectric Constant, 108 Hz	--	0
Dissipation Factor, 108 Hz	--	0
Flammability @ 3.1 mm	--	V-2
24 hour Water Absorption	%	0.3
Saturation Water Absoprtion	%	5.5
FDA compliance	--	No

Application

PA6GNF :-

Enplas PA6G NF grade offers a combination of excellent properties of various PA6 Grades with non fading blue colour for good aesthetics. This material possesses good fatigue resistance, high impact strength, shock resistance, heat stability and better heat aging properties. This is an ideal choice for gear applications offering minimal noise as well as high-speed capabilities.

Property	Unit	PA6G NF Blue
		Cast
Specific Fravity	--	1.15
Tensile Strength	MPa	83
Modulus of Elasticity	MPa	2760
Elongation at Break	%	20
Flexural Strength	MPa	110
Flexural Modulus	MPa	3500
Shear Strength	MPa	76
Compressive Strength	MPa	104
Compressive Modulus	MPa	2760
Hardness Rockwell	--	M85 (R115)
Hardness Durometer	--	D85
Izod Impact	ft.lb/in(of notch)	0.4
Coeffecient of Friction	--	0.2
Limiting PV	ft.lbs/in2 min	3000
Wear Factor	in3min/ft.lbs.hr	100
Coeffecient of Linear Thermal Expansion	in/in/oF	5 E-5
Heat Deflection Temperature	oC	34
Glass Transition Temperature	oC	--
Metaling Point	oC	102
Continuous Use Temperature	oC	53
Thermal Conductivity	BTU in/hr ft2 oF	1.7
Dielectric Strength	Volts/mil	500
Surface Resistivity	ohm/square	>1 E+13
Dielectric Constant, 108 Hz	--	3.7
Dissipation Factor, 108 Hz	--	--
Flammability @ 3.1 mm	--	HB
24 hour Water Absorption	%	0.6
Saturation Water Absoprtion	%	7
FDA compliance	--	No

Application

Engineering Polymers

High Performance Polymers

Machined Parts

Product Category